Fitment: For ISX CM870 2002-2007 Stage 2
Description
Hereβs the detailed technical breakdown for the EGR Delete Plug Kit (Stage 1 Plates & Plugs) for Cummins ISX CM870 (2002-2007) engines, including critical installation, tuning, and legal considerations:
π§ Kit Contents & Specifications
|
Component |
Purpose |
|
EGR Valve Block Plate |
Seals EGR valve mounting surface |
|
Intake Block-Off Plate |
Prevents exhaust gas entry |
|
Coolant Port Plugs |
Seals coolant passages |
|
Exhaust Manifold Plug |
Blocks off EGR feed |
β οΈ Critical Fitment Notes
-
Engine Compatibility:
β 2002-2007 Cummins ISX CM870 (STAGE 2 engines only)
β Does NOT fit:-
CM871 (2007+ with DPF)
-
ISX15 (2010+)
-
Any EPA 2010+ compliant engines
-
-
Visual Identification:
-
Stage 2 ISX has a round EGR valve mounted on the intake horn
-
CM871+ has a square EGR module near the turbo
-
π οΈ Installation Requirements
Tools Needed:
-
Torx T40 (EGR valve bolts)
-
13mm & 15mm sockets
-
High-temp RTV sealant (Permatex Ultra Copper recommended)
-
Torque wrench (22-25 ft-lbs for plate bolts)
Key Steps:
-
Coolant System Prep:
-
Drain coolant below the thermostat level
-
Cap open lines with included plugs
-
-
Sensor Management:
-
Leave EGR temp sensor plugged in but secured away
-
Retain all other emissions sensors
-
-
Plate Installation:
-
Apply RTV to both sides of plates
-
Torque bolts in criss-cross pattern
-
β‘ Performance Impact
| Before Delete | After Delete |
|---|---|
| 250Β°F+ intake temps | 120-150Β°F temps |
| Soot-clogged intake | Clean airflow |
| Frequent EGR cooler failures | Eliminated failure point |
| 5-8% fuel economy loss | Restored MPG |
Expected Gains:
-
3-5% improved fuel economy
-
Extended valve/turbo life (no soot abrasion)
-
Lower EGTs (by 150-200Β°F under load)
π¨ Legal & Warranty Consequences
| Risk | Penalty |
|---|---|
| EPA Violation | $4,819 per offense |
| DOT Roadside Inspection | $2,500+ fine + OOS order |
| California BAR | Registration suspension |
| Resale Value | 30-40% reduction |
Dealer Impact:
-
ECM stores permanent “Emissions Tamper” flag
-
Voids all emissions-related warranties
π» Mandatory Tuning
Without Tuning:
-
Derate to 5mph within 50 miles
-
Fault Codes: P0401-P0406, P0299 (boost leaks)
-
Regen system malfunctions
Recommended Tuners:
-
EFI Live (w/ CSP5 switch) β Best for custom tuning
-
Smarty S-67 β Pre-loaded delete tunes
-
H&S XRT Pro β For real-time adjustments
Parameters to Modify:
-
Zero out EGR valve position tables
-
Disable EGR cooler monitoring
-
Adjust MAF scaling for cleaner airflow
π© Supporting Mods
-
Cold Air Intake (S&B 75-5075)
-
Boost Leak Fix Kit (BD Diesel 1037201)
-
EGT/Boost Gauges (Edge CTS3)
π Legal Alternatives
For trucks needing compliance:
-
Cummins #4926887 β EGR service kit
-
Pacbrake EGR Cleaner β CARB-legal maintenance solution
Additional information
| Condition | 100% Brand New |
|---|---|
| Function | Performance Use |
| Package Content | One full set, refer to the picture |
Customer Reviews
No reviews yet. Be the first to review this product.
EGR Delete Plug Kit Stage 1 Plates and Plugs For Cummins ISX CM870 2002-2007 Stage 2
$23.00






Reviews
There are no reviews yet.