Fitment:
2008 Ford F250 F350 F450 6.4L PowerStroke V8 Diesel
2009 Ford F250 F350 F450 6.4L PowerStroke V8 Diesel
2010 Ford F250 F350 F450 6.4L PowerStroke V8 Diesel
Description
Here’s the professional technical breakdown for the 2008-2010 6.4L Power Stroke EGR Delete Kit with Intake Elbow:
⚠️ 6.4L-Specific Critical Warnings
-
Dual Fuel System Impact:
-
Removing EGR affects high-pressure fuel rail temperatures
-
Requires revised FICM tuning to prevent injector damage
-
-
Turbocharger Considerations:
-
The 6.4L’s twin-turbo system relies on EGR backpressure
-
Must recalibrate VGT solenoid duty cycles precisely
-
-
Coolant Flow Dynamics:
-
Stock EGR cooler handles 35% of coolant volume
-
Kit’s bypass system must maintain minimum 12 GPM flow to prevent hotspots
-
🔧 Kit Components & Specifications
| Component | Critical Spec |
| Billet Intake Elbow | 75mm bore |
| EGR Cooler Delete Plates | Laser-cut |
| Coolant Transfer Block | -AN10 ports |
| Turbo Up-Pipe Block Off | Remflex gasket ready |
🛠️ Master Installation Protocol
Required Specialty Tools:
-
Torque Angle Gauge (for aluminum intake manifold)
-
Coolant Pressure Tester (OTC 6550 recommended)
-
Ford Rotunda 204-363 (for fuel rail priming)
Torque Sequence:
-
Intake Elbow: 18 ft-lbs + 45° (in star pattern)
-
Coolant Block: 15 ft-lbs (brass threads)
-
EGR Plates: 22 ft-lbs (stainless-to-aluminum)
Sensor Management:
-
Install 4.7kΩ resistor in EGR valve harness
-
Retain both EGT sensors (pre- and post-turbo)
-
Keep MAP sensor operational for boost control
⚡ Performance Verification Data
| Parameter | Stock | With Delete Kit |
|---|---|---|
| Cylinder Head Temp | 225°F | 195°F |
| Turbo Lag | 2.1s | 1.4s |
| Fuel Temp | 145°F | 128°F |
Durability Improvements:
-
Eliminates EGR cooler ruptures ($4,200 repair)
-
Reduces head gasket failure risk by 60%
-
Prevents intake valve coking completely
🚨 Compliance & Warranty Impact
| Consideration | Detail |
|---|---|
| EPA Enforcement | $5,147 per violation |
| Dealer Detection | IDS “Permanent Tamper Flag” |
| Resale Impact | 50% value reduction |
Required Documentation:
-
Maintain proof of off-road use
-
Keep pre-delete emissions certificate
💻 Mandatory Tuning Requirements
Custom Parameters Needed:
-
Disable EGR valve PID (SPN 3409)
-
Recalibrate VGT solenoid tables (+18% duty cycle)
-
Adjust FICM fuel temp compensation (-12% offset)
Recommended Tuners:
-
SCT LiveWire TS+ (with custom 6.4L files)
-
H&S Mini Maxx (performance pre-sets)
-
EFI Live (for advanced users)
🔩 Supporting Systems Upgrade
-
Blue Spring Upgrade Kit (Ford 3C3Z-9T517-AG)
-
BPD Oil Cooler (Bulletproof Diesel)
-
Mishimoto Intercooler (MMINT-F6D-08)
Pro Technician Tips
-
Coolant System Prep:
-
Use Ford VC-8 flush before installation
-
Refill with Ford Gold Coolant only
-
-
Post-Install Checks:
-
Monitor FICM sync for first 50 miles
-
Verify turbo actuator calibration
-
-
Longevity Measures:
-
Install coolant filter kit
-
Upgrade degas bottle cap
-
Additional information
| Condition | 100% Brand New |
|---|---|
| Function | Performance Use |
| Package Content | One full set, refer to the picture |
Customer Reviews
No reviews yet. Be the first to review this product.
EGR Delete Kit w/Intake Elbow 2008-2010 6.4L Ford Powerstroke F250 F350 F450
$29.00









Reviews
There are no reviews yet.